The roles
Each member has exactly one role.
Whoever creates a workspace becomes its owner.
What each role can do
Each person manages their own account (profile, language, password, two-factor authentication), regardless of role. See Settings.
Invite a member
The invited person gets “an email with a link that is valid for seven days.”1
Enter address and role
In the “Invite member” card, enter the “Email address” and choose the “Role”. The choices are Admin, Member and Viewer. Below the field is the description of the chosen role. The default is Member.
2
Send the invitation
Choose Send invitation. You see “Invitation sent to [address].” The email comes with the subject “[Name] invited you to [Workspace]” and the button “View invitation”.
3
Accept the invitation
The invited person opens the link and accepts the invitation (see below).
Limits when inviting
- The invitation is valid for seven days. The expiry date is in the email and in the list. The link only works for the invited address.
- If the address is already a member, the app reports “This person is already a member of the workspace.”
- You can send at most 50 invitations in 24 hours. A workspace as a whole has this limit too. Resending counts. After that the app reports “You have already sent a lot of invitations today. Please try again tomorrow.”
- If you invite the same address again, the earlier open invitation becomes invalid.
- If the email cannot be delivered, the app revokes the invitation immediately and reports it. Then you try again.
- If the inviting person is no longer an owner or admin of the workspace when the invitation is accepted, the invitation counts as withdrawn.
Open invitations
The “Open invitations” card shows all invitations that have not been accepted yet. For each there are address, role and “Valid until” or “Expired on” with a date. The date follows the workspace’s time zone.
Expired invitations carry the note “Removed 30 days after expiry”. An invitation that has already been accepted cannot be revoked. Accepted and revoked invitations no longer appear in the list.
Accept an invitation
The link in the email opens the page “Invitation to [Workspace]”. It names who invited you with which role, which address the invitation is for and until when.1
Sign in with the right address
Without being signed in, the page currently only offers Sign in, with the address prefilled. Below it says: “New accounts are not being created right now. If you already have an account with exactly this email address, sign in.” Invited people without an account cannot join at present. You can only accept with an existing account under exactly the invited, confirmed address. More about the account is under Getting started.
2
Accept the invitation
Choose Accept invitation. It is only accepted by click, never automatically when the link is opened.
3
Work in the workspace
Afterwards the app opens this workspace’s overview.
Who invited whom
In the member list, below the name and address of an invited member, it says “Invited by …, joined on …” with the name of the person who invited and the day of acceptance. The line stays even if the inviting person has left the workspace. Then their name at the time of acceptance appears there, without an address. If the inviting person has not entered a name in their account, which only still happens with older accounts, it only says “Joined by invitation on …”. Whoever created the workspace carries no such line.Change a role
In the “Members” table, the “Role” column has a selection for every member you may manage. If you choose a new role, it is saved immediately. You see “The role of [Name] is now [Role].”- Owners can assign any role, including Owner.
- Admins can assign Admin, Member and Viewer. They can neither change nor appoint owners.
- Your own row has neither a selection nor a Remove button. So you cannot change your own role. The column only displays it, and the member is marked “You”.
- The last owner cannot be demoted or removed: “The last owner cannot be removed or demoted. Appoint another owner first.”
Remove a member
1
Choose a member
In the member’s row, choose the trash icon (“Remove [Name]”).
2
Confirm
The “Remove member” dialog says: “[Name] ([address]) immediately loses access to this workspace.” Choose Remove.
Approval before sending
Approval is available on the Team plan. It ensures that a member only sends an offer after an admin or owner has approved it.Set the rule
Owners and admins choose in the settings, in the “Approvals” tab, in the “Approval before sending” card, under “When does a member need approval?”:
For the offer value, the preselected package including preselected add-ons counts. Offers in a currency other than the workspace’s always need approval. The rule applies to members. Owners and admins never need approval, and viewers do not send.
One or two approvals
Under “How many approvals does a send need?”, owners and admins choose:
The number applies to each of the three rules above. In addition:
- The person who requests never counts, not even if they later become an admin. Each person agrees at most once.
- Two approvals are only possible once the workspace has at least two admins or owners. Otherwise the card warns: “Two approvals are only possible once the workspace has at least two admins or owners.”
- If an admin or owner declines, the request is rejected. A revocation revokes the whole approval. If someone changes the draft, it expires as before.
- If you change the number, the higher number applies to open requests. Switching from two to one makes an open request with one approval unsendable. Approvals already granted stay granted.
- Whoever is no longer an admin or owner no longer counts. If this makes a granted approval incomplete when two agreements are needed, it is revoked, without an email. The member requests again.
- If the number of admins falls below two, nobody can complete requests that need two approvals. A remaining admin rejects them and switches to one approval. HocDoc never lowers the number on its own.
Request approval
If a send needs approval, the send dialog shows Request approval. You can add a message to the approvers (“Message to the approvers (optional)”). The approval applies to exactly these details: recipient, company, valid until and the offer as it is sent. Admins and owners get an email with the subject “Approval requested: [Title]”. While the request is open, the dialog says: “Your request is open. You will get an email once an admin or owner has decided.”Approve or reject
Owners and admins see open requests in the settings under “Open requests” and on the offer in the “Approval” card. There they choose Approve or Reject. A comment is optional, but required for a rejection. Whoever requested gets an email (“Approved: [Title]” or “Rejected: [Title]”) with the comment.- With two approvals, the “Approval” card and the “Open requests” list show the state, for example “1 of 2 approvals”, with the names of those who agreed. Whoever has already agreed or requested sees a note instead of the buttons. After the first agreement, the other admins and owners get the email “One more approval needed”, the send dialog shows “1 of 2 approvals so far.” and the email to the requesting person names both names.
- After approval, the dialog says: “Approved. You can send it now.” Recipient, company and Valid until are then fixed.
- After a rejection you change the offer and request again, or you ask once more with the same version.
- An approval applies to exactly one version of the draft. If someone changes something afterwards, the card says “The draft has changed since the request.” and the send needs a new request.
Reminder
If a request is still open after 24 hours, an email (“Reminder: approval for [Title] is open”) reminds the admins and owners once, with two approvals only those who have not yet decided, in the language of their account. There is no second reminder. Per workspace at most 10 reminders go out per run and 20 per day.Revoke approval
Owners and admins revoke an approval up to the send. On the “Approval” card they choose Revoke approval and enter a reason under “Reason for revoking”. It is required, and the person who requested gets it by email (“Approval revoked: [Title]”). The card shows “Approval revoked by [Name].” with the reason. After that, the send needs a new approval: the member adjusts the offer or asks once more with the same version. After the send, the approval can no longer be revoked (“The offer was already sent with this approval. It can no longer be revoked.”).Locked sections
Admins and owners lock individual sections in the builder (Lock section, on the right in the “Lock” field). Only admins and owners change, move and delete locked sections. Members see a lock and the note “Locked, only admins can change it”. The lock also stays in offers created from a template with this section. More under Templates and variables. Locked sections are available on the Team plan. An offer created from a template keeps the template’s locks in any case, even if it is created through the API. Members do not create a template with locked sections, neither with “Save as template” nor through the Data API: locking is reserved for admins and owners.Switch between workspaces
You can be a member of several workspaces, for example through invitations. From two workspaces on, the account menu at the bottom left shows the “Switch workspace” section. The active workspace carries a checkmark. If you choose another, the app opens its overview. The app remembers your choice. Roles apply per workspace: you can be an owner in one workspace and a viewer in another.Read-only mode for viewers
Viewers see offers and analytics but change nothing.- In the builder, “Read only” appears at the top with a note: “You have read access in this workspace. You can view the offer, but not change it.” The sidebar shows only the offer’s structure. There is no save status, no undo and no sending. Sections can be viewed and selected.
- On an offer’s detail page the button is called View in the builder instead of “Open in the builder”.
- On the “New offer” page it says: “You only have read access in this workspace and cannot create offers.” The offer list shows no “New offer” button. Templates, library and contacts cannot be edited, and the library trash is missing.
- In the settings, “Read only.” appears.
- In onboarding, “Create your first offer” is missing.